OCCUPANCY AND VACANCY WALL SENSOR SWITCH
3 WAY
3 OPTIONS:
AUTO ON /AUTO OFF - MANUAL ON / AUTO OFF - MANUAL ON /MANUAL OFF
BUILT-IN OCC/VAC SLIDE BUTTON OFFERS MANUAL ON OR AUTO ON
CAN USE AS : OCCUPANCY SENSOR, VACANCY SENSOR, 3WAY SWITCH
NEW IN THE BOX (INSTRUCTION SHEET ENCLOSED)
THE OTHER SIDE OF THIS 3WAY SENSOR SHOULD BE 3WAY ON/OFF SWITCH
-
COLOR : WHITE
-
UL AND CUL LISTED
-
WALL PLATE INCLUDED
-
VOLTAGE : 120V/277V AC ; 60Hz
-
RATED : 120VAC : 800W (INCANDESCENT LAMP) ;
-
120VAC : 600W/VA , 277VAC : 1000W/VA (FLUORESCENT LAMP RAPIT START)
-
LOAD HORSE POWER : 1/6 HP
-
REPLACES A STANDARD LIGHT OR FAN SINGLE-POLE SWITCH
-
CONFORMS TO CALIFORNIA TITLE 24 CODE
-
WORKS WITH INCANDESCENT, FLUORESCENT , CFL , LED (OVER 20W)
-
ADJUSTABLE TIME DELAY AND SENSITIVITY
-
LIGHT LEVEL SENSING
-
OPERATION TEMPERATURE : 32° TO 131°F (0° TO 55°C)
-
TIME DELAY ADJUSTMENT : 5 SECS. TO 30 MINUTES.
-
COVERAGE RANGE : 180 DEG.
NEUTRAL WIRE (WHITE) REQUESTED
THIS SENSOR SWITCH HAS 5 WIRES:
WHITE (NEUTRAL), GREEN (GROUND), BLACK (HOT), RED (LOAD), BLUE (3WAY)
NOTE -> This item is 3Way sensor that you should replace it with your 3Way switch you have on the wall. 3Way switch has one wire as Hot (coming from source) and 2 load wires (going to Light). You need to have Neutral wire in your Elec. Box also to could use your sensor. Green wire is Ground that could connect it to elec. Box also. if you are not familiar with wiring get help from professional electrician to do safe job.